TRI W-G TG1800 Series, Руководство пользователя

Страница: 4 / 12

Page 2
INTRODUCTION
Thank you for selecting the Tri W-G Hi-Lo Mat Table. The purpose of these operating instructions is to intro-
duce the authorized user/operator in using and working with this device safely, and to conduct routine preven-
tative maintenance procedures on the device. For this goal to be achieved, it is essential that the authorized
user/operator carefully read this manual, understand, and practice the precautionary measures recommended
in it.
P
LEASE HAVE ANYONE WHO WILL BE OPERATING THIS TABLE READ THIS MANUAL
.
UNCRATING
1. Inspect for any damage to the table immediately after uncrating. If the table is damaged, file a merchan-
dise damage report immediately with the delivering carrier. Do not return damaged merchandise to Tri W-G

unless instructed to do so.
2. Keep the cardboard liner on top of the table while moving table to desired location. This will prevent dam-
age to the frame and cushion while moving down hallway, through doorways, etc.
3. Remove all other packaging material from the table, except for the cardboard cushion liner.
INSTALLATION
1. There is no assembly required.
2. Position table in an area having flat/level floors so table is not distorted out of alignment and caster brakes
will function as intended.
3. Casters should be locked at all times except for when moving. Casters should be locked when a person is
on the table.
4. Connect power cord to properly grounded 120 Volt AC receptacle, conforming to applicable nationally rec-
ognized electrical codes.
5. Power supply cord serves as disconnect device. The socket-outlet shall be installed near the equipment
and shall be easily accessible.
IMPORTANT SAFETY/PRECAUTIONARY INSTRUCTIONS
1. Once again, please have anyone who will be operating this table read the manual before using. Operator
should understand and practice the precautionary instructions recommended in this manual. All users should
use common sense and know the limitations and hazards associated with operating the table.
2. NEVER place your hands or feet, nor the patients’ hands or feet, near any of the working mechanisms of
the table when raising or lowering the table. Also, DO NOT place or leave objects or items of any kind under-
neath the base frame of the table when operating.
3. Whenever you see this symbol: it means “Attention! You and/or Your Patients’ Safety is Involved”.
4. During table operation, stop the table operation if anything unusual is observed or unusual sounds are heard
coming from the table.