Connections and Dimensions
Mini Label Eye Sensor
SUPPLY VOLTAGE
• 4.75 to 30Vdc
• Polarity Protected
Note: For use in Class 2 Circuits
CURRENT REQUIREMENTS
• 18 milliamps (exclusive of load)
OUTPUT TRANSISTORS
• (1) NPN and/or (1) PNP (depending on model)
• Outputs sink or source up to 120 milliamps
(current limit)
• All outputs are continuously short circuit
protected
REMOTE SET INPUT
• Active high (PNP) or active low (NPN),
depending on model (1ma)
• Transient spike protected
Note: Input not available on "L" models
RESPONSE TIME
• 35 microseconds
LED LIGHT SOURCE
• High Intensity IR LED
AMBIENT TEMPERATURE
• -40ºC to 70ºC (-40ºF to 158ºF)
PUSH BUTTON CONTROL
• One push AUTOSET
• LT/DK inverts output
• Adjust threshold (+ or -)
HYSTERESIS
• 5%
LIGHT IMMUNITY
• Responds to sensor's pulsed modulated light
source, resulting in high immunity to most
ambient light
INDICATOR
• (GREEN or RED) to indicate power is on.
• AMBER during AUTOSET.
• RED when sensor's output transistors are ON,
and GREEN when they are OFF.
Note: Flashes RED when a short circuit
condition exists.
CONNECTIONS
• M8, 4-pin
• Attached cable: 4-wire 6.5ft (2.0m)
HOUSING CONSTRUCTION
• Top lid: polycarbonate
• Output window: ABS
• Case: 50% glass filled nylon
• Buttons: silicon rubber
RATINGS AND CERTIFICATIONS
• IP65
• CE
• UL pending
Specifications
RoHS Compliant
Product subject to change without notice
www.ttco.com • 800-237-0946
070-0677 Rev. 3
GEC-6
4-Pin 6ft (1.8m) Cable
GEC-15
4-Pin 15ft (4.6m) Cable
GEC-25
4-Pin 25ft (7.6m) Cable
Accessories
