Tri-Tronics Classic 70S, Руководство пользователя

Страница: 9 / 27

INSTALLING THE COLLAR STRAP
Your Remote Trainer is shipped with the receiver separate
from the collar strap. Install the strap as shown in the
illustrations.
On multi-dog units, be sure to install the correct color strap
on each receiver. Use the colored strap that matches the
colored dot on the receiver.
You can easily adjust the strap for different sized necks by
sliding the receiver along the strap. If the strap is too long for
your dog, you can cut off excess length. Leave enough length
to go through any d-ring or keeper that is present.
(See “Fitting the Collar on the Dog” page 10.)
You may also use any collar strap that fits the receiver.
Slide the correct color strap through one side of the receiver,
then through the other side. Snug the strap firmly against the
surface of the receiver. Position the buckle where it is convenient
for the size of your dog's neck.
Installing the Collar Strap Page 7