Tri-Tronics Classic 70S, Руководство пользователя

Страница: 12 / 27

TURNING THE REMOTE TRAINER ON AND OFF
The Remote Trainer consists of a hand-held transmitter and
a radio receiver on the dog’s collar. The collar must be turned
on before it can receive signals from the transmitter. Between
training sessions, you should turn the collar off to save
battery life.
To turn the Remote Trainer collar on, press the gray button
on the collar. The collar light will start blinking and you will
hear two tones, confirming that the collar is on.
To turn the collar off, press the gray button. The collar light
will make one long flash to indicate that the collar is turned
off. You will hear one tone, confirming that the collar is off.
You can also turn a collar off by placing it on its charger.
FITTING THE COLLAR ON THE DOG
Place the collar strap in the middle of the dog’s neck.
The receiver should be on the underside of his neck.
Place the receiver so the light is facing forward (towards
the dog’s nose).
Tighten the buckle by holding it with two fingers as you
pull the strap snug. Do not put any fingers under the strap
as you tighten it. Make it snug. Remote Trainers need to be
snug to work properly. A loose collar can cause inconsistent
stimulation.
Page 10 Remote Trainer
To tighten the collar on the
dog, hold the buckle as shown
and draw the strap snug.
Remote Trainers need to be
snug for consistent stimulation.