manualshive.com logo in svg

TRI tool 01-2140, Руководство по эксплуатации

Поделиться
Скачать
TRI tool 01-2140 Скачать руководство пользователя страница 9

Model 612RBL-G2 thru 642RBL-G2 Clamshells

92-1739 Rev. 220506

7

WARNING

WARNING: After a cut, one or both sides of a poorly secured pipe can move and cause 

death or serious injury.

CAUTION

CAUTION: ELECTRIC MOTORS

Use only the recommended AC voltage power sources.

Observe all electric shock hazard procedures.

Do the following to reduce the risk of damage to the power and control cords:

•   Do not pull or run over the cords or the cables.

•   Keep all control and power cords away from fluids and water.

CAUTION

CAUTION: HYDRAULIC DRIVES

Do not touch the components of hydraulic systems, except for the controls during and 

after equipment operation. The hydraulic system can get hot enough to cause burns. 

Wait for the equipment to cool down before handling.

Do not damage the hydraulic lines.

Keep quick-disconnects clean because grit contamination causes malfunctions and 

damages the equipment.

Do the following to reduce the risk of damage to the power and control cords:

•   Do not pull or run over the cords or the cables.

•   Keep all control and power cords away from fluids and water.

CAUTION

CAUTION: PNEUMATIC TOOLS

Do not touch the components of pneumatic systems, except for the controls during and 

after equipment operation. The pneumatic system can get hot enough to cause burns. 

Wait for the equipment to cool down before handling.

Check the exhaust muffler. Broken or damaged mufflers can restrict air flow or cause 

excessive noise.

Bleed off all residual air pressure before disconnecting air lines..

Air that is over or under pressure or contaminated can cause malfunctions including 

delayed or irregular starts.

Содержание 01-2140

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды