manualshive.com logo in svg

TRI tool 01-2140, Руководство по эксплуатации

Поделиться
Скачать
TRI tool 01-2140 Скачать руководство пользователя страница 30

TRI TOOL INC.

92-1739 Rev. 220506

28

CAUTION

CAUTION: The alignment of the tripper pin to the sprocket must be correct. If it is not, 

operation of the clamshell may cause serious damage or destroy the tripper pin and 

sprocket.

Figure 11:  Correct and Incorrect Alignment of the Tripper Pin

Correct Alignment

of Tripper Pin

Incorrect Alignment

of Tripper Pin

Install Clamshell on an In-Line Pipe

Preparation for Separating the Clamshell

1. 

Rotate the Headstock until the split-lines of the Headstock match the split-

lines of the Housing.

2.  Unbolt the two Red Lock Blocks attached to the Headstock.
3.  Flip the Blocks over.
4.  Re-attach the Blocks with the Dowel Pin by passing the Pin through the 

Headstock and into the Housing. The headstock is now locked into place 

and cannot rotate out of the Housing while the Clamshell is in half. Refer to 

Fig. 12.

WARNING

WARNING: Do not let the headstock rotate out of the housing while the clamshell is in 

half. If it rotates out of the housing, it could fall on the user and cause personal injury or 

damage the equipment or both.

Содержание 01-2140

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды