Tri-M Systems TCB1000 Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 35

Tri-M Systems TCB1000 Series Скачать руководство пользователя страница 7

Page 7

www.tri-m.com

TCB1000 Series User Guide Rev A

1 Introduction

The TCB1000 Series features dual SJA1000 CAN Bus controllers, isolated serial ports, and two MultiTech®

Universal compatible sockets on a single PC/104 board design. This high density communication board offers

an all-in-one communication solution, optimizing Size, Weight, and Performance (SWaP) requirements for

easier system integration. TCB1000 is an industry first, and takes full advantage of the latest technologies in

jumperless configuration, high voltage isolation, and advanced communication functionality.
The TCB1000 Series includes advanced networking and configuration capabilities. The 4xRS-232 ports and

1xRS-485 port feature 2500V isolation protection and indi5VDC isolated power supplies, thus providing

less noise and increased system protection. The RS-485 port can be configured as J1708.
With USB connectivity and jumperless setup, extended operating temperature, and versatile options, Tri-M’s

TCB1000 Series is your perfect choice for CAN Bus, serial, wired, or wireless communication. To learn more

about the TCB1000 Series, please contact us at 1-800-665-5600 or visit us at http://www.tri-m.com/products/

trim/tcb1000.html.

Key Specifications

•

All-in-one PC/104 communication solution for CAN Bus, serial port, wired, and wireless

communication (including optional GPS functionality)

•

High voltage (2500V) port isolation to reduce noise and increase system protection

•

Advanced CAN Bus functionality—such as socket network device operation—adds flexibility to your

embedded system to reduce development time, cost, and installation setup

•

Jumperless configuration with secure lock, ensuring uniformity and maximizing system security

•

Extended operating temperature -40°C to +85°C (-40°F to +185°F), suited for outstanding

performance and reliability in harsh environments

•

OS support for Linux kernels 2.6.25 and later

Models

TCB1002

Communications board with 2 isolated CAN Bus controllers

TCB1120

Communications board with 1 isolated RS-485 port, 2 MultiTech Universal Sockets

TCB1400

Communcations board with 4 isolated RS-232 ports

TCB1522

Communcations board with 4 isolated RS-232 ports, 1 isolated RS-485 port, 2 isolated CAN Bus

controllers, and 2 MultiTech Universal Sockets

Part Number for Cable Set

CABLESET002

Cable set is sold separately. Includes a PGM config cable, serial cable, CAN Bus cable, and

utility cable. For more information, see “A Appendix” on page 31.

Options

•

Conformal Coating (Acrylic CH, Acrylic higher voltage CH1, Silicone CS, Urethane CU)
Ruggedized protection against temperature, fungal resistance, humidity, and chemical.

For more information, please visit our website at http://www.tri-m.com/products/trim/conformal.html or

call 1.800.665.5600.

«
...
5
6
7
8
9
...
»

Содержание TCB1000 Series




































Отзывы:

Нет отзывов