![Tri-M Systems FV-25 Скачать руководство пользователя страница 99](http://html.mh-extra.com/html/tri-m-systems/fv-25/fv-25_user-manual_1159621099.webp)
99
CFG – EKF (0x06 0x12)
It’s a poll request. It’s used to poll EKF configuration. The module responds the same
message defined below.
Header ID
Data
Length
Data
Checksum
0xB5 0x62
0x06 0x12
0
None
CK_A CK_B
CFG – EKF (0x06 0x12)
It’s an I/O message. It’s used to set/get EKF configuration.
Header ID
Data
Length
Data
Checksum
0xB5 0x62
0x06 0x12
16
See below
CK_A CK_B
Data
Offset bytes
Format
Descriptions
Notes
0
U1
EKF status
1 – disabled
0 – enabled
1
U1
Flags
Bit 0 – reserved (always 0)
Bit 1 –
clear temperature
compensation table
Bit 2 – clear stored calibration
Bit 3 – reserved (always 0)
Bit 4 – set nominal tacho pulses
as defined in Field “Nominal
pulses per kilometer”
Bit 5 – set nominal gyro values
as defined in Fields “Nominal
gyro zero point output” and
“Nominal gyro sensitivity”
Bit 6 – set temperature table
configuration as defined in Fields
“Maximum allowable RMS
threshold” and “ The time
interval for saving temperature
table to flash”
Bit 7 – set direction pin and gyro
sense meaning as defined in
Field “Inverse_flags”