12
before install or remove any accessory.
-
Do not immerse the main unit in water or other liquids;
clean it with a damp cloth.
WARNING!!! Do not overload appliance. Total
weight of ingredients in the container cannot be
over 4 Kg, in case of soft dough, or 3 Kg, in case of
hard pastes like pizza, or 2.5 Kg for fresh made pasta.
-
When using pasta, fettuccine or spaghetti maker, do not
insert fingers or hair or clothes on the reels.
-
When using the meat grinder, use only the specific
accessory to press food inside the feeding tube.
WARNING!!! Do not use the appliance as kneading
machine and with one of the optional accessories at
the same time. This may result in damage due to
overload.
DESCRIPTION G20113
1.
Transmission
2.
Head release lever
3.
Knob 6 speeds
4.
Main housing
5.
Stainless steel bowl
6.
Hook
7.
H accessory (mixer)
8.
Beater
9.
Lid
10.
Cover and accessories gear
12.
Food pusher of meat grinder
13.
Dish of meat grinder
14.
Meat grinder accessory
15.
Pasta maker accessory
16.
Fettuccine maker accessory
17.
Spaghetti maker accessory
KNEADING
-
Fit the container (5) in place by turning it in the direction of LOCK until it blocks.
-
Raise the main body using the release lever (2).
-
Install the accessory by entering the joint in the drive shaft of the unit, and then turn the locking ring until it
stops. Mount the lid (9) on the bowl.
-
Place the ingredients inside the bowl. The total weight of ingredients cannot exceed 4 Kg, in case of soft
dough, or 3 Kg, in case of hard pastes, like pizza paste, or 2.5 Kg for fresh made pasta.
-
Lower the arm by releasing the lever (2). Connect the plug into an electrical outlet.
-
Start the product with the knob (3) and choose a speed between 1 and 6. It is advisable to use lower speed
at the beginning, and then go to higher speeds. If the dough is hard do not use high speeds.
CAUTION: To avoid overheating do not use continuously for more than 20 minutes; in this case
interval with at least 10 minutes of rest. Do not use the appliance without food inside the container.
-
When the work is finished, stop the machine taking the knob (3) to “0”
After the process, release the arm with the button (2) and lift it, remove the accessory and the container with
food. Remove the dough using a spatula.
Clean the product by following the instructions you will find in “Cleaning” section.
SELECT THE ACCESSORY
There are three accessories included, to be used depending on the situation.
HOOK (6). Use this accessory with hard dough, like bread, pizza, pasta, etc...
MIXER (7). Use it with soft dough, such as sweets, or for blending, mixing
