14
XCD
5760 USB
ENGLISH
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal mounting
sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
DASHBOARD
METAL MOUNTING SLEEVE
UNIT CHASSIS
PLASTIC TRIM RING
FRONT PANEL
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
To attach the removable faceplate, insert the
right side of the faceplate into the right of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until you hear
it click .
“
”
Remove the two screws that protect
the CD player during transportation
before operating the player.
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
NOTE
Press the MODE button to change among tuner (radio), disc (when a disc is
loaded), USB (when an USB stick is inserted) and AUX mode.
In Radio mode, Press MODE/PTY button longer to select one of the following
mode: POP M- - NEWS
While selecting PTY TYPE, its selection is implemented by preset buttons as
described in preset key.
When POP M or NEWS is on, the previous PTY program and PTY word is
displayed on LCD.
If there are no keys entered for 2 seconds, previously selected PTY is searched.
During 1 loop, if desired PTY is not found, NO PTY is flashed, then return to
previous normal radio and PTY icon goes off.
Press the mode button to select auxiliary input playing mode. Then you can
connect any matched external audio device to this socket. Use the volume
knob to adjust volume.
In order to play the file in the USB stick, turn over the plastic cover cap then
insert the USB stick into the USB socket. The system will change into the
USB mode automatically, and then play the first file in the USB.
During radio mode:
1)Press this button briefly to select the radio broadcasting band you would
like to hear. The AM/FM band is toggled cyclically through the tuning bands:
->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
2) Press and hold for more than 1 second, the radio searches from the current
frequency and checks the signal strength level until 6 station are found.
And then the 6 stations frequency are preset to the corresponding preset
memory numbered bank. The auto-storage operation is implemented in the
each selected band. When the auto-storage operation is finished, the radio
execute the Preset Scan.
During MP3 file in disc, or USB mode:
Press this button to turn to TRACK SEARCH mode, the LCD will display TRK
000 and flash the biggest digit 0 that the USB stick contain. (if the number of
tracks is less than 100 and more than 9, it will be TRK 00)
Then rotate the VOL knob to select the number of the flashing digit from 0 ~ 9.
Then press SEL button to confirm the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press SEL button to play the track of
the selected serial number.
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
15. MODE AND PTY (PROGRAM TYPE) BUTTON
16.AUX INPUT JACK
17.USB SOCKET
18. BAND/APS BUTTON
19. RESET BUTTON
(press one of the 6 preset buttons shortly and repeatedly
to select the PTY TYPE in the preset button)
Page 6
Page 7
20. MMC/SD CARD SLOT
When you need to play the file in the MMC/SD card, insert the MMC/SD card into the
MMC/SD card slot. The system will change into the MMC/SD mode automatically,
and then play the first file in the MMC/SD.
Note:
When MMC/SD card and USB stick are both inserted into their slot or socket, the
system will change into the playback mode of the latter one.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
