Trevi Tab 7 3G S8, Руководство пользователя

Страница: 35 / 92

35
Orientation Sensor Setting
The device contains a sensor that will automatically change the orientation of screen by
90 degree as you rotate the tablet. The sensor works the best when the tablet is rotated
perpendicular to the ground (i.e., when the tablet is held upright and not flat on its back).
The Orientation sensor can be activated or deactivated in the Setting menu: General Fun
-
ction - Auto-rotate screen. Tick the box if you want to activate the sensor or un-tick the
box to deactivate this function.
Battery management and recharging
a. Recharge the battery about 3 to 4 hours to make sure the battery is fully charged at the
first time.
b. Plug in the power charger provided in the accessory pack to the DC-5V (Micro USB)
located on the up side of the device and connect the power charger to a proper power
socket. Once the power is connected, the battery recharging icon will appear
on the
status bar which indicating that the device is under recharging. When the power recharging
icon will turn to blue entirely when the battery is fully recharged and you can disconnect
the power charger from the device.
Note
In order to keep the battery in the best condition, please pay attention to the below:
• Don’t recharge the device under high temperature.
• Don’t release the power of the battery, you can charge the battery when there is still
power in the battery. It is not necessary to wait the battery to completely run out before
recharging.
• To maintain the battery with a long life span, keep recharging the battery once every two
weeks in the case if you don’t use the device for a long time.
WIFI network settings
From desktop, Tap to enter setting menu and slide WI-FI function to ON and tap the
desired WIFI network and enter the wireless network setting page.
Enter the password and tap “Connect” or tap “Cancel” to exit to previous screen.
Bluetooth setting ENGLISH