Trevi SB 8320TV, Руководство пользователя

Страница: 7 / 24

7
SB 8320TV ENGLISH
VOLUME ADJUSTMENT AND MUTE FUNCTION
It's possible to adjust the volume of the unit with the volume keys (4 on the device, 7 on the remote control)
1. Press the + button to increase the volume of the device.
2. Press the - button to decrease the volume.
Note:
When connecting to the headphone output of a TV or a device that has its own speakers, these usually are disabled and to have a good output signal
need to adjust the volume to the maximum level through the commands of TV (or device).
When connecting to the audio output of a TV-Scart (or any audio output that is not the headphone jack of another device), the level of the sound
output is constant and not adjustable via the command own the TV (or device); the speakers of the TV (or device) is not disabled and if you want to
silence them need to lower the volume completely otherwise the reproduction is in addition to the Sound Base.
MUTE: To activate the mute function of the device via the MUTE button (8) on the remote control ; to reactivate listening press the MUTE button.
Note:
- Some audio outputs which you connect the Sound Bar (like headphone output) can have its own volume control: make sure you have set on the
source device an adequate level audio output otherwise the Sound Bar will sound even at maximum volume.
- If the sound played by the Sound Bar be distorted means that the input signal is too strong: lower the volume of the Sound Bar or paid on a level
audio source device output more low.
AUX
1. Use a jack cable 3.5mm stereo to connect the AUX input on the rear to the headphones / audio of the TV or other source device.
2. Turn on the unit and press the SOURCE button (2) to select the AUX input (or press the button AUX(11) on the remote).
3. For proper playback sound refer to chapter VOLUME ADJUSTMENT AND MUTE FUNCTION
BLUETOOTH OPERATION
1. Turn on the unit and press the SOURCE button (2) to select the BLUETOOTH function (or press the button BT(12) on the remote).
2. Press and hold the PAIR button, the system automatically enters search.
3. Activate the Bluetooth feature on the external device.
4. Initiate a search for devices. After select the "SB 8320 TV".
5. Enter the password "0000" if required.
6. Press

/
 to start playing and the keys
9
or
:
to select tracks.
7. Press and hold the PAIR button to make a new pairing operation.
FUNCTION EQUALIZER
The sound bar has a pre-set equalization, press the EQ buttons(13) during playback to select the dynamic sound that best fits the music style: Flat,
Movie, Music.
INSTALLATION
CONNECTING TO THE POWER SUPPLY
Fit the plug into an 230V~ 50Hz socket. Do not plug the appliance to different power.
Unless otherwise specified, the controls description applies to both the appliance and the remote control.
POWER ON/ STANDBY AND AUTO POWER FUNCTION
1. Press the power-on/standby ON/OFF key (1) to switch on the device.
2. Press the power-on/standby ON/OFF key (1) again to switch the device back to standby mode.
This device is equipped with Auto Power On/Off function; this function allows the automatic power on off Sound Bar in the presence of an audio signal
on one of the input and automatic shutdown when no audio signal inputs after 15 minutes.
Note: If the Sound Base does not react to any operation or does not work properly, disconnect the power cable for 30 seconds to reset the device.