Trevi HCX 10D8 DAB Скачать руководство пользователя страница 12

Страница: 12 / 36

HCX 10D8 DAB

ENGLISH

SUPPLY

Connect the power cord (2) to 100-240V 50 / 60Hz power outlet.
Do not connect the appliance to electrical outlets other than those indicated.
At the first start-up the device will scan the DAB stations present, the display will show the word SCANTIME. Wait until the display
shows the current time.

Note: Unless otherwise specified, the descriptions of the commands apply to both the device and the remote control.

ON / OFF

1. Press the STANDBY / FUNC (2) button to turn the unit on.
2. Press the STANDBY / FUNC (2) button to turn off the unit
Note: In CD, USB or AUX source, if no operation is performed within 15 minutes, the unit will automatically enter STANDBY mode.

VOLUME CONTROL, XBASS AND EQUALIZER FUNCTION

1. Turn the Volume control (4) on the unit or press the VOL + or VOL- (11) button on the remote control to increase or decrease

the volume.

2. Press the XBASS button (20) to activate the bass boost function. Press it again to deactivate it.
3. Press the EQUALIZER key (21) to select one of the preset audio dynamics (Classic, Rock, Pop, Jazz, Flat).

FM RADIO OPERATION

1. Switch on the appliance and press the SOURCE button (6) repeatedly until the FM indication appears on the display.
2. Press the keys

/TUN+ (12) or

/TUN- (11) on the unit repeatedly, or the keys

/TUN+ (15) or

/TUN- (4) on the remote

control to increase or decrease the frequency 0.05MHz and perform a step-by-step search.

3. Hold down for a few seconds the keys

/TUN+ (12) or

/TUN- (11) on the unit, or the keys

/TUN+ (15) o

/TUN- (4) on

the remote control to tune into the station next or previous radio with the best signal received.

4. Press the SCAN key for a long time to activate the automatic radio station search and save function (SCAN). The unit is able to

store up to 20 stations. By long pressing the MENU key (13, 8 on the remote control) it is possible to select the type of automatic
search; under SCAN confirm with SELECT (14) and select STRONG (stations with strong signal) or ALL (all stations), confirm
with SELECT (14).

5.   To store a radio station:
-   Move to the frequency to be memorized, press and hold down the MEMORY (3) key on the remote control.
  The word PROG flashes on the display.
-   With the keys

/TUN+ (15) o

/TUN- (4) on the remote control, select the memory number where you want to save the radio

station.

-   Press the ENTER key (16) to confirm.
-   The unit can store up to 20 stations.
6.   To call up a stored radio station use the CH + (18) and CH- (14) buttons.
7.   To switch the playback from STEREO to MONO and vice versa, press the MONO / ST button (14).

Note: To get the best FM reception connected and oriented the antenna. If reception is not good try to adjust the length and orientation

of the antenna differently, however the quality of FM reception depends very much on the place where the device is placed.

RADIO DAB / DAB + OPERATION

1.   Switch on the appliance and press the SOURCE button (6) several times until the DAB indication appears on the display.
  When you switch it on for the first time, the radio will automatically scan and store all the available DAB stations.
2.   If you want to repeat the scan operation of the available DAB stations, long press the MENU / INFO button (13) to access the

DAB menu. Full scan will appear.

3. Press the SELECT (14) button to start scanning the DAB stations.
4. Press the

/TUN+ (12) o

/TUN- (11) button on the unit, or the

/TUN+ (15) o

/TUN- (4) buttons on the remote control

to scroll through the various tuned DAB stations. Press the SELECT (14) button on the desired DAB station to start playback.

5. Press the MENU / INFO button (13) several times to display information about the received station.

RADIO DAB / DAB + MENU

1. Long press the MENU / INFO button (13) to enter the DAB menu.
2. Press the key

/TUN+ (12) o

/TUN- (11) on the unit, or the keys