10
CMP 532 USB
4
CD/MP3 OPERATION
Discs for playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio CD-Recordable
(CD-R) discs and finalized digital audio CD-Rewritable (CD-RW) discs.
LOADING A DISC
1. Set the FUNCTION switch to CD/MP3/USB/AUX IN position.
2. Open the CD door. “
OP
” will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door, the total number of tracks will appear in the display.
5. To remove the CD, open the CD compartment lid, grasp the CD by its edges, and carefully take it out.
Note:
To ensure good system performance; wait until the disc tray completely reads the disc before
proceeding.
If no disc is loaded into the compartment, or the disc is placed upside down, the display will show
“
”.
PLAYING A DISC
2. Press the PLAY/PAUSE/STANDBY button on unit or on remote control to start playback. The
playback starts from track 1, “
►
” will appear on the display.
3. To interrupt playback, press the PLAY/PAUSE/STANDBY button, “
►
” and the track number will
flash on the display.
4. To resume playback, press the PLAY/PAUSE/STANDBY button again.
5. To stop playback, press the STOP/USB button, the total number of tracks would appear in the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the CD SKIP/SEARCH NEXT/BACK button repeatedly in stop mode or during play until the
desired track appears on the display.
Press the PLAY/PAUSE/STANDBY button to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the CD SKIP/SEARCH NEXT/BACK button to scan the current playing track at high
speed until desired point passage, and then release the button.
Playback will start again from this point.
To select a song which track number exceeds 10
(
for MP3 disc only
)
To select a song/track which number exceeds 10, Press the FOLD.+/+10 button each time to skip
forward/backward 10 tracks, then press the CD SKIP SEARCH NEXT/BACK button to select desired
track. For example: to select the 17
th
track, press FOLD.+/+10 button, and then the CD SKIP SEARCH
NEXT button six times immediately.
To Select A Desired Folder
(
for MP3 disc only
)
(if the MP3 disc contains more than one folder)
To skip to the desired folder during playback, press and hold the FOLD.+/+10 or FOLD.-/-10 button for
about 2 seconds to skip to next/previous folder.
5
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99 tracks
can be stored in the memory in any order.
1. In stop mode, press the PROG./P-MODE button, the PROG will flash and the
P01
indicator will be
on.
2. Press the CD SKIP/SEARCH NEXT button to select the first desired track to be programmed.
3. Press the PROG./P-MODE button to enter. The display changes to show
P02
.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the PLAY/PAUSE/STANDBY button to start playback from the first programmed track.
6. Press the STOP/USB button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP/USB button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT
You can play one track or all tracks on the disc repeatedly.
To Repeat a Single Track
1. Press PROG./P-MODE button once in play mode
,
“ ” will flash on the display. The current track
will be played over and over again till you press the STOP/USB button.
2. To cancel repeat play, press PROG./P-MODE button control until “ ” disappears from the
display.
To repeat all the Tracks
1. Press PROG./P-MODE button until the “ ” shows steady on the display, all tracks on the disc
will be played over and over again till you press the STOP/USB button.
2. To cancel repeat play, press the PROG./P-MODE button control until “ ” disappears from the
display.
To repeat the folder (only for MP3 disc which contains more than one folder)
1. Press the PROG./P-MODE button until “ FOLDER” show steady on the display, the current
folder will be repeated over and over again till you press the STOP/USB button.
2. Press the PROG./P-MODE button once to cancel.
RANDOM PLAY
Press the PROG./P-MODE button in play mode till the “ RDM ” shows steady on the display, the
random play will start from next track automatically(or press CD skip forward button), until all tracks
are played over and then stop. Press the PROG./P-MODE button once to cancel.
INTROSCAN PLAY
(
for CD disc only
)
Press the PROG./P-MODE button in play mode till the “INTRO” shows steady on the display, the unit
will start to play the first 10 seconds of music of each track, until all tracks are played over and then stop.
Press the PROG./P-MODE button once to cancel.
ENGLISH
Содержание CMP532USB
