TCD-108
6686
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,/fax:+48 58 56 300 80 www.ega.com.pl
28
Driving screws
It is recommended to drill the pilot borehole first. The pilot borehole must be a little deeper
and with a less diameter than the outer diameter of the screw thread. When the screw is to
be driven within the vicinity of the material edge the pilot borehole prevents from undesired
chipping of the material.
If the screw is driven with abnormal difficulty the screw must be retracted and the pilot
borehole diameter should be enlarged. Anyway, when problem to drive the screw in persists
(e.g. in case of hard wood grades) try to use a lubricating agent (e.g. liquid soap).
Press the tool to the screw with sufficient force to avoid spontaneous rotation of the driving
bit in the screw head. Use only those bits that accurately match the bit head.
When the screw head is damaged further driving the screw in or out may prove infeasible.
Storage and maintenance
The tool in principle does not require any special maintenance or service. The tool must be
stored in a place that is not accessible to children and must be kept clean and protected
from moisture and dust. The storage conditions should prevent potential mechanical
damage and impact of the weather conditions.
Warning!
Starting the cleaning operations and unplug the charger from the outlet. The power adapter
and the charger may be cleaned exclusively with use of a dry cloth. Use also a clean cloth
to clean regularly the ventilation openings of the tool to keep them patent. From time to time
disassemble the grip and remove dust and other rubbish from the interior. The tool housing
must be cleaned with use of a moistened cloth small quantity of soap and then wiped dry.
Do not use any detergents or solvents as they can damage parts made from plastics. After
cleaning let the tool dry completely before it is used again.
Transportation
Store and transport the tool in its transport box to protect it against humidity, dust
penetration and small objects; remember to protect its ventilation openings. Small objects
after getting into the casing can result in damage to the motor.
Содержание 6686
Страница 2: ......
