6
8. MODE
Press this key to select cooling, fan, dehumidifying or heating.
ALARM
When the water tank is full,"E2" will be displayed on the display panel. To resume operation, please remove the rubber cap of the drain
hose to drain out the water firstly. The E2 warning will disappear after draining, and then you can restart the unit by pressing the POWER
key.
L.E.D. DISPLAY
The display indicates the current setting temperature or the timer setting. When the set temperature or the timer is adjusted, the new
setting is shown then the display returns the current set temperature.
※
The display is also used to show error codes should a fault occur, see ERROR
CODES.
REMOTE CONTROL FUNCTION
1. POWER
2. MODE
3. TIMER
4. SPEED
5. TEMP+
6. TEMP-
7. SLEEP
8. SWING
On/Off switch
MODE selector
Hourly programming
Fan speed selector
Temperature selector up
Temperature selector down
Night operation selector
Auto air flow selector
