Trendy Pooches Designs Pawfect Bathing System, Руководство пользователя

Страница: 5 / 11

Installation of the Pawfect bathing system
Mounting the box
Choice a suitable location for the Pawfect bathing system box. This should be close enough to
the bath or shower tray to allow the user to move the shower head to any part of the
washing area without putting stretch on the shower hose. The unit is supplied with a 1.5mtr
hose. Should a longer hose be required we can supply a 2mtr hose at additional cost or your
local plumbing supplier should be able to supply one. The required hose is a full-bore hose
for low pressure systems and not a standard hose.
The unit should be mounted where there is no obstruction for the user and the user should
be able to see and reach the unit at all times when in use.
The box will arrive with the front cover loose.
Lift the front cover being aware that the wires attached to this should not have strain put on
them.
Place front cover in a safe place for retrieval later.
Identify the mounting holes in the corners of the box. Offer the box to its chosen location and
mark the wall through the mounting holes.
Place box in a safe place.
Drill the wall at the marks to accept suitable fixings.
Retrieve the box and screw it to the wall through the mounting holes.
Piping the water supply.
The water enters the box through the right side. Identify the incoming pipe.
The water supply pipe should have a full flow isolation valve of the lever type.
Flush out pipework into a suitable container for at least 2 minutes prior to connection.
We recommend that an inline filter be installed after this valve to reduce the chance of
debris entering the system.
Run a 15mm pipe from the valve/filter to the incoming pipe of the system. A flexible pipe
may be used providing it is a large bore type.
Fitting the shower hose/head.
Attach the shower hose to the unit via the 1/2-inch threaded fitting on the left side of the box
and using the rubber washers provided.
Attach the shower head to the other end of this pipe and using the rubber washers provided.