- 29 -
Note
: Use “To Remote IP” function to prohibit all local stations from accessing certain
web sites on the Internet (requires the web site’s IP address).
TCP/UDP Port Filter
: Filter using the port number. You can set filter for a single port or a
range of ports.
??
TCP port
: filter according to the Connection-Based Application Service on the
remote
server using the port number.
??
UDP port
: filter according to the Connectionless Application Service on the
remote
server using the port number.
Not
e: You can only set each filter type to either forward or filter. For example, you can’t set
one IP address to forward and set another IP address to filter. You must set them both to
either forward or filter. However, you can set to forward an “Adapter Address” and set to
filter an “IP address”.
Each time you finished setting the filters, click
?
and the added filter will appear on the
Filter
List
.
Delete:
To remove a filter, click to select the filter in the
Filter List
and click
Delete
Delete All:
Click to delete all the listed virtual servers.
After the configuration, click on
Save
to save the settings. Click
Cancel
to cancel the
configuration process.
