TRENDnet TW-H6W1IR Скачать руководство пользователя страница 76

Страница: 76 / 165

TW-H6W1IR ISDN Remote Router

Configuration

and

Management

Each decision on handling packets is described below:

1. Disable –

will not apply a filter.

2. Forward –

this allows the routing of a packet, even though it

has not met the criteria of the corresponding filter.

3. Drop –

this drops (doesn’t allow routing for) a packet that has

not met the criteria for the corresponding filter.

Layer 2 Filter

The

Layer 2 Filter

sub-menu contains a protocol independent (data-

link layer) filter. Foreknowledge of the specific protocol used on the
interface (LAN or WANs) is needed to make effective use of this filter.

The parameters of a filter are described below:

Name –

this is a 12 character (maximum), alphanumeric, user-

defined name, used to identify the filter.

Содержание TW-H6W1IR






































































































































































Результаты поиска

Содержание TW-H6W1IR

Отзывы:

TRENDnet TW-H6W1IR, Руководство пользователя, Страница: 76 / 165

Результаты поиска

Содержание TW-H6W1IR

Отзывы: