background image

 

 

 

 

 

 

 

 

  

 

© Copyright 2011 TRENDnet. All Rights Reserved. 

 

 

 

 
TRENDnet User’s Guide

 

TV-IP672W / TV-IP672WI 

38

 

Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital 
device,  pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide 
reasonable  protection  against  harmful  interference  in  a  residential  installation.    This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a 
particular  installation.    If  this  equipment  does  cause  harmful  interference  to  radio  or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one of the following measures: 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the 
receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation. 

FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party 
responsible for compliance could void the user's authority to operate this equipment. 

IEEE  802.11b  or  802.11g  operation  of  this  product  in  the  U.S.A.  is  firmware-limited  to 
channels 1 through 11. 

IMPORTANT NOTE: 

FCC Radiation Exposure Statement: 

This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an 
uncontrolled  environment.  This  equipment  should  be  installed  and  operated  with 
minimum distance 20cm between the radiator & your body. 

This  transmitter  must  not  be  co-located  or  operating  in  conjunction  with  any  other 
antenna or transmitter. 

 

Europe – EU Declaration of Conformity 

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. 
The  following  test  methods  have  been  applied  in  order  to  prove  presumption  of 
conformity with the essential requirements of the R&TTE Directive 1999/5/EC: 

EN 60950-1: 2006 +A11:2009 

Safety of Information Technology Equipment 

EN 62311: 2008 

Assessment  of  electronic  and  electrical  equipment  related  to  human  exposure 
restrictions for electromagnetic fields (0 Hz-300 GHz) 

(IEC 62311:2007 (Modified)) 

EN 300 328 V1.7.1: (2006-10) 

Electromagnetic  compatibility  and  Radio  spectrum  Matters  (ERM);  Wideband 
Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band 
and  using  spread  spectrum  modulation  techniques;  Harmonized  EN  covering  essential 
requirements under article 3.2 of the R&TTE Directive 

EN 301 489-1 V1.8.1: (2008-04) 

Electromagnetic  compatibility  and  Radio  Spectrum  Matters  (ERM);  ElectroMagnetic 
Compatibility  (EMC)  standard  for  radio  equipment  and  services;  Part  1:  Common 
technical requirements 

EN 301 489-17 V2.1.1 (2009-05)  

Electromagnetic  compatibility  and  Radio  spectrum  Matters  (ERM);  ElectroMagnetic 
Compatibility  (EMC)  standard  for  radio  equipment  and  services;  Part  17:  Specific 
conditions for 2,4 GHz wideband transmission systems 

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in 
all  EU  member  states  and  EFTA  countries,  except  in  France  and  Italy  where  restrictive 
use applies. 

 

In Italy the end-user  should  apply for a  license at the national  spectrum authorities in 
order to obtain authorization to use the device for setting up outdoor radio links and/or 
for supplying public access to telecommunications and/or network services. 

This  device  may  not  be  used  for  setting  up  outdoor  radio  links  in  France  and  in  some 
areas  the  RF  output  power  may  be  limited  to  10  mW  EIRP  in  the  frequency  range  of 
2454 – 2483.5 MHz. For detailed information the end-user should contact the national 
spectrum authority in France. 

 

Содержание TV-IP672W












































Отзывы: