TRENDnet TV-IP322P, Руководство пользователя, Страница: 83 / 134

- 82 -

Camera List displays the status of the connected cameras. If
multiple cameras are connected, you can switch to the live
view of each camera by simply selecting the camera from
the list.

eMap allows you to select the desired camera to the view
from the map easily. Please note that you have to set up
the eMap for monitoring in advance.

Camera Control Buttons provides the control buttons that allow you
to control the selected camera.
Buttons Functions
Talk On/Off. Click to enable/disable the speaker
function of the connected camera. This option is
available only in single camera view mode.
Listen On/Off. Click to enable/disable the microphone
function of the connected camera. This option is
available only in single camera view mode.
For Pan/Tilt cameras, use this control panel to set the
preset positions (up to 8 positions).
Use Navigation buttons to adjust camera position, and
then select the position number (1~8) from the Set
button.
To move to the preset position, simply select the
position number (1~8) from the Go button.
Navigation Buttons (Left/Right/Up/Down/Home). If the
connected camera has pan/tilt functions, the Navigation
buttons allow you to move the camera lens position.
Clicking the Home (center) button will move the camera
lens to the assigned home position.
/
The Patrol/Stop buttons are used to enable/disable the
patrol function of the camera. Click Patrol to start
patrolling through the preset positions once. Click Stop
to stop patrolling.