TRENDnet TV-IP322P Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 134

TRENDnet TV-IP322P Скачать руководство пользователя страница 133

- 132 -

OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR
INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE
PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN
SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Governing Law

: This Limited Warranty shall be governed by the laws of

the state of California.

Some TRENDnet products include software code written by third party
developers. These codes are subject to the GNU General Public License
("GPL") or GNU Lesser General Public License ("LGPL").

Go to

http://www.trendnet.com/gpl

or

http://www.trendnet.com

Download section and look for the desired TRENDnet product to access
to the GPL Code or LGPL Code. These codes are distributed WITHOUT
WARRANTY and are subject to the copyrights of the developers.
TRENDnet does not provide technical support for these codes. Please go
to

http://www.gnu.org/licenses/gpl.txt

or

http://www.gnu.org/licenses/lgpl.txt

for specific terms of each license.

«
...
131
132
133
134
»

Содержание TV-IP322P







































































































































Отзывы:

Нет отзывов