
TRENDnet User’s Guide
TV‐IP323PI
© Copyright 2018 TRENDnet. All Rights Reserved.
26
Network Settings
TCP/IP
Setup your basic IPv4 and IPv6 network settings on this page.
Network Interface
MAC Address:
Click this button to reboot this camera.
Duplex and
Speed:
Choose one of the Ethernet duplex and speed to
match your network. Default: auto.
MTU:
Maximum transmission unit
.
The maximum field size
in the Ethernet packet.
Multicast
Address:
Sends a stream to the multicast group address and
allows multiple clients to acquire the stream at the
same time by requesting a copy from the multicast
group address. **Note: Multicast function needs to
be supported by your Local Area Network.
Enable Multicast
Discovery:
Check this box if you would like to allow this device’s
multicast address to be discoverable.
Primary DNS:
Enter your first IPv4 or IPv6 DNS server address.
Secondary DNS:
Enter your second IPv4 or IPv6 DNS server address.
IPv4
DHCP:
Check this box if the IP address is assigned by DHCP
server.
IPv4 Address:
The IPv4 dynamic or static address.
IPv4 Subnet
Mask:
Network range of the subnet.
Default Gateway:
The default route going further from TV‐IP323PI IPv4
subnet.
IPv6
IPv6 Mode:
Choose Manual, DHCP, or Route Advertisement. Click
View Route Advertisement to find a route
advertisement.
IPv6 Address:
IPv6 address of TV‐IP323PI.
IPv6 Subnet
Mask:
Length of network prefix.
Default
Gateway:
The default route going further from TV‐IP323PI IPv6
subnet.