TRENDnet User’s Guide
TV‐IP312PI
© Copyright 2017 TRENDnet. All Rights Reserved.
35
802
.
1X
Setup 802.1X for remote authentication service.
802.1X Authentication
Enable IEEE
802
.
1X:
Check this box to enable 802.1X authentication
service.
EAPOL version:
Extensible Authentication Protocol (EAP) over LAN
(EAPoL)
.
Choose version 1 or 2
.
This version number
has to match to your 802
.
1X service EAPOL version
.
User Name:
Enter the account name
.
Password:
Enter the password
.
Confirm:
Enter the password again
.
Click
Save
to save the changes
IP Address Filter
Set up a list of clients allow only the clients on the list to access this camera
or to reject clients on the list from access this camera.
IP Address Filter
Enable IP
Address Filter:
Check this box to enable IP address filtering service.
IP Address Filter
Type:
Choose Deny to ban the listed IP addresses or
Allowed to allow listed host to access this camera.
Add:
Click Add to add a user account
Modify:
To modify an entry on the list, highlight the entry by
clicking on it. Then, click the Modify button.
Enter the IP address then click OK
Delete:
To delete an entry on the list, highlight the entry by
clicking on it. Then, click Delete
Clear:
To clear all entries, click Clear
Click
Save
to save the changes
