TRENDnet TS-I300 - NAS Server - ATA-133, Руководство пользователя

Страница: 7 / 29

- 13 -
3. Place the HDD onto the metal bracket, and secure it to the storage
server with four mounting screws.
4. Replace the cover and secure with two screws.
NOTE:
1. Make sure to adjust the HDD’s jumper to “Master” position.
2. When the HDD is installed, the system will automatically perform
format (File system type: EXT2) as you turn on the storage server.
- 14 -
Installing the Storage server
Follow these steps for a trouble-free start of storage server operations
with your storage server.
Connecting to the Network
1. Confirm proper operation of the Gateway/Hub to be connected in
the network.
2. Connect the storage server to the Gateway/Hub using the Ethernet
cable.
3. Connect the power adapter of the storage server to the wall outlet.
This will supply power to the storage server immediately.
Connecting to a Client Workstation
For some specific purposes, you may need to connect the storage
server to a client workstation directly. For example, you build a direct
connection between your desktop PC and the storage server to
configure the storage server. In this event, you should set up the
computer’s IP address as instructions in next section.
Expanding the USB Devices
The storage server provides two USB ports that allow you to expand
the storage server’s function, such as connecting a large storage
device. To connect the USB device, simply plug the USB device into
one of the storage server’s USB ports. Alternately, you can connect
the USB device through a USB cable. In addition, you can connect a
USB Hub to expand the USB connection.