TRENDnet TS-I300 - NAS Server - ATA-133, Руководство пользователя

Страница: 5 / 29

- 9 -
LEDs
There are six LEDs on the front panel:
LEDs on the Front Panel
•
Power – A steady Green light indicates the storage server is
powered on.
•
LAN – A steady Green light indicates the storage server has a
good connection to your network. When it blinks, the storage
server is receiving/ transmitting data from/to the network.
•
HDD – A blinking Green light indicates the HDD is reading/
writing data.
•
HDD Full – A blinking Orange light indicates the HDD is
getting full (95%). A steady Orange light indicates the HDD is
complete full (100%).
•
USB – The LED off indicates no USB devices connected to the
storage. When you are connecting a USB device to the storage
server, the LED starts blinking
Green first, and then becomes a
steady Green light to indicate the connection is OK; the Orange
light indicates the connection failed. When you are unmounting
the storage server, it blinks
Orange .
- 10 -
•
WLAN (TS-I300W only) – A steady Green light indicates the
storage server has a good connection to your wireless network.
When it blinks, the storage server is receiving/transmitting data
from/to the wireless network.
•
HDD Full/USB/WLAN three LEDs-
Press the Reset button for 5 seconds until these three LEDs are
blinking transfer to revolving lamp. When factory default setting
is completed , three LEDs will turn off.
Buttons
There are three buttons on the storage server:
•
Power button – Press to turn on the storage server. Press and
„
Support Real time clock ( RTC )
„
Web-based administrative program is stored in flash ROM o
„
No setup necessary in open mode.
„
Firmware upgrade-able by Windows-based
„
Support Windows 98/ME/NT/2000/XP and Linux SMB.
„
Provide FTP Server service
„
Support UPnP for windows XP.
„
Provide an easy-search program for different IP domain sett
hold for 5 seconds to turn off.
•
Unmount button – Press to safely remove the connected USB
devices.
•
Reset button – Press to restart the storage server. Press and hold
for 5 seconds to reset the storage server.( HDD Full/USB/WLAN
will be blinking/ revolving/turn off)
Fan and Ventilator
The fan and ventilator are designed to cool the HDD. DO NOT block
or cover the ventilator for air circulation.
Using the Base Holder
According to your working environment, you can set up the storage
server as a “Stand mode” by putting it onto the provided base holder.