manualshive.com logo in svg

TRENDnet TPL-310AP, Быстрое руководство по установке, Страница: 10 / 21

Поделиться
Скачать
TRENDnet TPL-310AP Скачать руководство пользователя страница 10

8

4. 

(OPTIONAL) Connect a network cable from the 

TPL-310AP into the network port on your
remote computer or network appliances (e.g. 
Game Console, IP Set box, network enabled 
TV, etc.).

5. 

Verify that the WIFI (Wireless) (Blinking/Green), 
ETH (Ethernet) (Green), PL (Powerline) and 
PWR (Power) (Solid/Green) LEDs are on for 
the TPL-310AP.

Outlet

Outlet

3. 

Plug the TPL-310AP into an available power 

outlet in your desired location to extend 
wireless connectivity.  Please refer to the 
Wireless Tips section for optimal placement of 
the TPL-310AP.

Your installation is now complete

Register Your Product

To ensure the highest level of customer service and support, please take a moment to
register your product Online at: 

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

For detailed information regarding the 

TPL-310AP 

configuration and advanced settings, 

please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or 
TRENDnet's website at http://www.trendnet.com.

Содержание TPL-310AP






















Отзывы:

Нет отзывов