8
?
?
Next Channel (Port)
Note: You can also press the “up arrow key” or “down
arrow key” again within 2 seconds from the last stroke
command to select the next or previous port.
?
?
Previous Bank
?
?
Next Bank
To select PC Port in Dais y-Chain Configuration:
?
?
?
Note: Please use the number keys above the letter keys on the keyboard to enter the bank and port
numbers.
?
?
Beep Sound Off / On
(for auto-scan mode only)
Note: The default is Beep Sound On
?
?
Auto Scan Mode
Note: In Auto Scan Mode, the Switch will automatically scan from one computer to the other. The
Switch will “beep” once when changing from one computer port to the next. You can turn the beeping
sound off or on by pressing “Scroll Lock” key twice and then press “B”. During the scan, the Switch’s
LEDs will display the “Port No.” that it is currently monitoring. The default scan interval time is 10
seconds. You can change the time interval in OSD menu (see On Screen Display Operation below). In
daisy-chain configuration, it is possible to set different scan time interval for each Switch. When the
Switch is in Auto Scan Mode, press any key to cancel the Auto Scan Mode and the Monitor will show
the screen of the last scanned PC.
?
?
Reset to OSD default value
Note: Not including password
.
Note: During the ROM Flash, you will see
flashing on the screen and the
Master Switch’s “Port No.” LED shows “ -- -- “. The ROM Reflash process takes about 55
seconds.
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
Page
Up
Scroll
Lock
Scroll
Lock
Page
Down
Scroll
Lock
Scroll
Lock
B
S
Scroll
Lock
Scroll
Lock
R
Scroll
Lock
Scroll
Lock
ROM REFLASH
Bank No.
1 ~ 8
Port No.
01 ~ 16
Note:
Port No. =
01 ~ 04 (TK-400R)
01 ~ 08 (TK -800R)
01 ~ 16 (TK-1600R)
Scroll
Lock
Scroll
Lock