11
Enter the new password (maximum 8 characters; please use only numbers and/or letters) and hit “Enter”,
the “retype new password” widow appears “.
Retype the new password and hit “Enter”. The screen will show “New Password Complete”. Hit “Esc” to
go back to OSD Menu. Please note that the default password is 8 zeros (i.e. 00000000).
d. The “
CONSOLE ON/OFF
“ feature allows you to turn off (exit) the console. To do so, use “Tab” key to
select CONSOLE ON/OFF, use left arrow (
?
) or right arrow (
?
) key to select OFF, and then hit “Esc”.
When the CONSOLE is off, you need to enter the correct password to enter the CONSOLE. The
CONSOLE will stay ON until it is turned OFF. Performing RESET and Power off the Switch also turns
the CONSOLE off. When the CONSOLE is on, any user can use the console/OSD and change the
Switch’s configuration (except changing the password). It is recommended that you turn the CONSOLE
off after you have finished configuring the KVM Switch.
e. After entering the CONSOLE (by entering the correct password), you will see the PC Name displayed
on the monitor. You can hit “Esc” key to remove the name displayed on the screen.
Troubleshooting
Precautions:
a. Ensure that all cables are well seated.
b. Label all cables properly to avoid confusion.
c. The Power Jack polarity is center positive and the power adapter output is DC12V, 1A (or DC9V, 1A).
d. Don’t press any keys on the keyboard while the computer is booting up. Otherwise, it might cause the
keyboard error or keyboard is not detecte d error.
1. The computer boot up fine, but keyboard doesn’t work.
??
Make sure the keyboard works when directly plugged into the computer.
??
Try a different keyboard, but use only 101, 102 or 104-key keyboard.
ENTER NEW PASSWORD :
¦
ESC : QUIT
ENTER : COMPLETE
RETYPE NEW PASSWORD :
¦
COMPLETE
ESC : QUIT
ENTER : COMPLETE
NEW PASSWORD COMPLETE
ESC : QUIT
ENTER : COMPLETE
102
¤ SYSTEM 02