TRENDnet TI-PF11SFP (V1), Быстрое руководство по установке

Страница: 5 / 9

ENGLISH
FRANÇAIS
DEUTSCH
ESP
AÑOL
Р
OR
TUGUÊS
3
Wall Mounting Instructions
1. Attach the wall mount plates to the media converter.
2. Mount the unit.
Safety Note
Ÿ
Turn off the power before connecting any module or wire. The correct power supply voltage
(48-56V DC) is listed on the product label. Check the voltage of your power source to make
sure that you are using the correct part. Do NOT use voltage greater than 48-56V DC, as
specified on the product label.
Ÿ
Calculate the maximum possible current in each power wire and common wire. Observe all
electrical codes dictating the maximum current allowable for each wire size. If the current
surpasses the maximum ratings, the wiring could overheat, causing serious damage to your
equipment.
!