TRENDnet THA-103AC, Быстрое руководство по установке

Страница: 16 / 34

15
4. WPS Setup with Android Device
Note :
Ÿ
WPS requires an external WPS button on your wireless router or access point in
order to connect the
THA-103AC switch to your network. If your router does not
have a WPS button, or if you prefer to connect to your wireless network using our
free app, please skip to the next section,
Manual Setup with Android Device
located below.
Ÿ
If you have an iOS mobile device, refer to Section 2, WPS Setup with iOS Mobile
Device , or Section 3, Manual Setup with iOS Mobile Device .
1. For the initial installation, plug in the THA-103AC into a power outlet near your
router or access point. Toggle the power switch down to the “On” position, and wait
30 seconds while the unit boots up.
2. Press and hold the WPS button on your router or access point for 5 seconds.
0:05
WPS