6
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
After connecting the Fiber converter, the LEDs do not turn on. What
should I do?
First, check that the power outlet is receiving power. Second, make
sure the power adapter is firmly connected to the Fiber converter and the
power outlet. Third, make sure the Ethernet and the Fiber cables are
connected.
All the LEDs are on, but I can't make a connection. What should I do?
What is the maximum distance that is supported by the fiber
converter?
Please refer to the Ordering Information section.
If you still encounter problems or have any questions regarding the Fiber
Converters please contact TRENDnet's Technical Support Department.
First, verify that you are using the proper fiber cable (e.g. single-mode
fiber cables). Second, power down the fiber converters and the switches.
Wait 15 seconds, then plug the switches and the fiber converters back in.
