3 Parallel Port Multiprotocol Wireless Print Server User’s Guide
Introduction
3
configuration and management via the
telnet
protocol for
networks without Windows-compatible machines.
External Features
This section describes the externally visible features of the Print
Server.
Port Connectors
The Print Server’s three printer ports are located on its rear panel.
Three identical parallel ports are labeled LPT1, LPT2 and LPT3.
These printer ports are independently configurable using the
PS
Admin
program or the print server’s
telnet
interface. (See the
PS
Admin User’s Guide
for information about configuring the print
server’s ports.)
Rear Panel
Wireless DIP Switch
The Print Server’s rear panel features a DIP switch allowing two
different modes of ad-hoc and infrastructure. In ad-hoc mode there
are 2 types of settings, 802.11 ad-hoc mode and Proprietary ad-hoc
mode where there is direct communication between PC/Notebook and
print server.
LPT3
LPT2
LPT1
Reset
802.11
Ad hoc
Any ESS-ID
Infra
DC 5V 2.4A
Cfg ESS-ID
ProPrietary