8
Unpacking and Installation
If any item is missing, or if you find any damage or mismatch,
promptly contact your dealer for assistance.
Installing the Print Server
WARNING:
Configuration problems may result if the Print
Server is powered up without first establishing
its network connection. Follow this procedure
to avoid complications at the configuration
stage.
1.
Confirm proper operation of each of the printers to be
connected to the Print Server.
2.
When you have confirmed proper operation of each printer,
switch its power off.
3.
Confirm that your wireless network is operating normally.
4.
(a)
Ad-Hoc Mode
u
Before initiating set-up procedure for the print server make sure
your wireless PCMCIA card on your PC/Notebook is set to
channel 11 with ESS-ID set as ‘default’ in ad-hoc mode.
u
Make sure the DIP switch on the print server is positioned in the
ad-hoc mode.
u
Press the Reset button on the print server for three seconds until
the LPT begins to light up initiating the factory reset.
u
When factory reset is completed the print server will be set to
default on channel 11 and ESS-ID is set as ‘default’.
Note 1: