TRENDnet TEW-P1U1P Скачать руководство пользователя страница 66

Страница: 66 / 80

9. Click

the

Browse Device

button, select the desired Wireless Print

Server, and click OK.

10. Click OK to return to the Printers folders, and right-click on the

Printer. Ensure that the

Work off-line

option is NOT checked.

The Printer should no longer be grayed out, and is ready for use.

Problem No. 3

I connected and configured a WPS (Windows Printing System)
printer as described, but I can't get the print job to print.

Solution No. 3

Printer drivers for WPS printers poll the printer before sending print
data. Since the printer is networked, the printer is not found and no data
is sent. The solution is to add your printer as a network printer as
described in Solution 2 above.

Note:

The screens shown in Solution 2 are from Windows 95. Other

versions of Windows may look slightly different, but the process is
identical. If using Window NT or 2000, do NOT enable Sharing for the
printer.

Problem No. 4

When printing from some software applications such as Power
Point, it takes a long time and the print out is incorrect.

Solution No. 4

The problem is due to the printer, which is being configured to

Start

printing after the first page is spooled

. To change this setting:

•

Go to

Control Panel - Printers

and click on your printer.

•

Then select

File - Properties - Details

•

When the Details screen appears, click the

Spool Settings

button.

•

When the Spool Settings dialogue box appears, choose

Start

printing after last page is spooled

and click OK.

Page 62

Содержание TEW-P1U1P

















































































Результаты поиска

Содержание TEW-P1U1P

Отзывы:

TRENDnet TEW-P1U1P, Руководство пользователя, Страница: 66 / 80

Результаты поиска

Содержание TEW-P1U1P

Отзывы: