TRENDnet TEW-P1U1P Скачать руководство пользователя страница 35

Страница: 35 / 80

TCP/IP Tab

Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options
are:

•

Dynamic IP Address

(DHCP) - The IP address is obtained automatically, from a DHCP

Server on your network.

•

Fixed IP Address

- You must enter the IP address, Subnet Mask, and Gateway Address.

•

IP Address

- Select an unused IP address from the address range used on your LAN.

•

Subnet Mask

- Use the same values as PCs on your LAN (or on the same LAN

segment, if you have a Router).

•

Gateway

- Use the same values as PCs on your LAN (or on the same LAN segment, if

you have a Router).

The TEW-P1U1P also supports the Auto-IP function. If the TEW-P1U1P is set to

Dynamic IP

Address

, but there's no DHCP server found on the network, the TEW-P1U1P will get an IP

from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even though the
TEW-P1U1P was initialized with an Auto-IP, it will change to DHCP whenever a DHCP
server is detected.

Figure 25: TCP/IP Screen

The

TCP session

parameters should only be changed if advised to do so by your Network

Administrator or Print Server Technical Support.

Page 31

Содержание TEW-P1U1P

















































































Результаты поиска

Содержание TEW-P1U1P

Отзывы:

TRENDnet TEW-P1U1P, Руководство пользователя, Страница: 35 / 80

Результаты поиска

Содержание TEW-P1U1P

Отзывы: