TRENDnet TEW-841APBO, Руководство пользователя

Страница: 40 / 57

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-841APBO
37
Management
Advanced
Management > Advanced
This page contains the SNMP, CLI, Telnet, SSH, and Email Alert configurations.
1. Log into your access point management page (see “ Access your access point
management page ” on page 27).
2. Click on Advanced under Management from the left side menu.
SNMP Settings

Status – Select Enable to enable SNMP. Default: Disabled

Contact – Enter the Contact for the SNMP in this field.

Location – Enter the Location for the SNMP in this field.

Port – Enter the Port for the SNMP in this field.

Community Name (Read Only) – Enter the community name designated with
Read Only permissions.

Community Name (Read Write) – Enter the community name designated with
Read Write permissions.

Trap Destination
o
Port – Enter the port number for the SNMP trap destination.
o
IP Address – Enter the IP address for the SNMP trap destination.
o
Community Name – Enter the community name for the SNMP trap
destination (defined above).

SNMPv3 Settings
o
Status – Select Enable to enable SNMPv3.
o
Username – Enter the username for the SNMPv3.
o
Authorized Protocol – Select the authorized protocol for the SNMPv3.
o
Authorized Key – Enter the key for the protocol specified above for
SNMPv3.
o
Private Protocol – Select the private protocol for the SNMPv3.
o
Private Key – Enter the private key for the protocol specified above for
SNMPv3.
o
Engine ID – Enter the engine ID.
CLI Settings

Status – Select Enable to enable Telnet Command Line Interface. Default:
Disabled
SSH Settings

Status – Select Enable to enable Secure Shell Interface. Default: Disabled