TRENDnet TEW-828DRU, Руководство пользователя

Страница: 25 / 72

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-828DRU
22
PBC (Software/Virtual Push Button)
Advanced > Wireless (2.4GHz or 5GHz (5GHz
1
or 5GHz
2
)) > WPS
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see “ Access your router management page ”
on page 9).
2. Click on Advanced , then click on Wireless (2.4GHz or 5GHz (5GHz
1
or 5GHz
2
)) , and
click on WPS .
3. To add a wireless device to your network, under WPS Action , click the Add Enrollee
button in the router management page. Then push the WPS button on the wireless
device (consult wireless device’s User’s Guide for length of time) you are connecting.
4. Wait for your router to finsh the WPS process.
Note: You should a message on your WPS client device indicating WPS was successful.
You can click Stop WPS to cancel the process or click PBC Again to restart the WPS
process.
PIN (Personal Identification Number)
Advanced > Wireless (2.4GHz or 5GHz (5GHz
1
or 5GHz
2
)) > WPS
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see “ Access your router management page ”
on page 9).
2. Click on Advanced , then click on Wireless (2.4GHz or 5GHz (5GHz
1
or 5GHz
2
)) , and
click on WPS .
3. To add a wireless device to your network, next to Client , enter the 8-digit numeric PIN
number of the wireless client device and click Start PIN . Note: You may need to initiate
the WPS PIN on your wireless device first when using this method. Refer to your wireless
device documentation for details on the operation of WPS.
4. Wait for your router to finsh the WPS process.
Note: You should a message on your WPS client device indicating WPS was successful.
You can click Stop WPS to cancel the process.