Time and Date
The Time and Date page allows you to manually configure the time and date of your
network or to synchronize with a Network Time Protocol (NTP) server.
To access the Time and Date page, click
SETUP
>
Time and Date
.
Time Zone
— Select the time zone in your location. To set the network time and
date according to the selected time zone, click the
Sync Time
button.
NTP
(Network Time Protocol) — Check the
Enable
box to synchronize the network
time and date with an NTP server.
•
Server 1 IP or Domain name
: Enter the IP address or the domain name of
the NTP server to synchronize your network with.
•
Server 2 IP or Domain name
: Enter the IP address or the domain name of
another NTP server to synchronize your network with in case Server 1 is
not available.
•
First Poll Frequency
: Enter the number in seconds of the first poll.
•
ThereAfter Frequency
: Select the succeeding frequency from the drop-
down list.
Daylight Saving
— Check the
Enable
box to enable daylight saving time.
•
Start Time
: Select the month and the day to start the daylight saving time.
•
End Time
: Select the month and the day to end the daylight saving time.
Click the
Apply
button to save your changes or click the
Cancel
button to discard
your changes.
