TRENDnet TEW-657BRM Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 109

TRENDnet TEW-657BRM Скачать руководство пользователя страница 67

Options

This screen allows advanced users to enter or change a number of settings. For normal opera-
tion, there is no need to use this screen or change any settings.

An example

Options

screen is shown below.

Data - Options Screen

Internet

Respond to Ping

•

If checked, the Wireless Router will respond to Ping (ICMP)
packets received from the Internet.

•

If not checked, Ping (ICMP) packets from the Internet will be
ignored. Disabling this option provides a slight increase in securi-
ty.

MTU Size

Enter a value between 600 and 1500.

Note:

MTU (Maximum Transmission Unit) size should only be

changed if advised to do so by Technical Support.

UPnP

UPnP

•

UPnP (Universal Plug and Play) allows automatic discovery and
configuration of equipment attached to your LAN. UPnP is by
supported Windows ME, XP, or later.

•

If Enabled, this device will be visible via UPnP.

•

If Disabled, this device will not be visible via UPnP.

Advertisement
Period

Enter the desired value, in minutes. The valid range is from 1 to 1440.

Advertisement
Time to Live

Enter the desired value, in hops. The valid range is from 1 to 255.

64

«
...
65
66
67
68
69
...
»

Содержание TEW-657BRM














































































































Отзывы:

Нет отзывов