TRENDnet TEG-S40SX Скачать руководство пользователя страница 9

Страница: 9 / 122

Gigabit Ethernet Switch User’s Guide

Introduction

NTRODUCTION

This section describes the features of the TEG-S40SX, as well as

giving some background information about Gigabit Ethernet and

switching technology.

Gigabit Ethernet Technology

Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing

the same packet structure, format, and support for CSMA/CD

protocol, full duplex, flow control, and management objects, but

with a tenfold increase in theoretical throughput over 100Mbps

Fast Ethernet and a one hundred-fold increase over 10Mbps

Ethernet. Since it is compatible with all 10Mbps and 100Mbps

Ethernet environments, Gigabit Ethernet provides a

straightforward upgrade without wasting a company’s existing

investment in hardware, software, and trained personnel.

The increased speed and extra bandwidth offered by Gigabit

Ethernet is essential to coping with the network bottlenecks that

frequently develop as computers and their busses get faster and

more users use applications that generate more traffic. Upgrading

key components, such as your backbone and servers to Gigabit

Ethernet can greatly improve network response times as well as

significantly speed up the traffic between your subnets.

Содержание TEG-S40SX



























































































































Результаты поиска

Содержание TEG-S40SX

Отзывы:

TRENDnet TEG-S40SX, Руководство пользователя, Страница: 9 / 122

Результаты поиска

Содержание TEG-S40SX

Отзывы: