17. Exit Windows to DOS prompt.
18. Change directory to where TRENDnet-View is installed. For example,
CD\TRENDNET.
19. Run MANAGER.BAT and it will bring up Windows 3.1 automatically.
20. Run TRENDnet-View by double clicking the TRENDnet-View In-band icon in
TRENDnet-View group.
21. You must place a TE-4010 software module in order for TE-4010 to be seen
by the TRENDnet-View software. Click once on the leftmost button in
the speed button bar. A Device window appears on the upper right corner
on the screen. Move the mouse over the TE-4010 icon and click on it to
select.
22. Move your mouse to the client area of the TRENDnet-View, notice your
mouse cursor changes from a pointer to a stamp. Click the mouse once and
a TE-4010 icon is placed on the client area area. Assign a name for this
hub and supply the IP Address for this hub (For example, 192.132.65.36).
Ignore all other entries. Close the dialog box.
23. Wait couple seconds and the hub's name (beneath the icon) will turn from
blue to green. Double-click the icon and you will see TE-4010 panel on
the screen. You are ready to manage your TE-4010!
Our current version of TRENDnet-View does not run with any network software
installed on the same machine. For example, Windows for Workgroups 3.1/3.11,
Novell Netware 2.x, 3.x, 4.x,....etc. Therefore, do not load any network
software (or network driver) before go into TRENDnet-View.
You must run MANAGER.BAT from DOS prompt before go into TRENDnet-View
software (in-band or out-of-band). MANAGER.BAT loads Windows 3.1
automatically.