Before you could use an adapter in a certain networking environment, you need to install first its
driver program for that type of environment. Otherwise, the adapter will not operate properly.
•
NetWare 2.x, 3.x, 4.x ODI driver (client and server)
•
Windows NT / Windows NT Advanced Server
•
Windows for Workgroups V.3.11
•
Windows 95
•
SCO Unix
•
NDIS Driver
•
Packet Driver
•
NBIOS Driver
Aside from the drivers listed above, you may also use the NE2000 drivers on the TE-16PnP. For
the installation procedure, see the README file in the driver diskette.
Specifications
•
Complies with IEEE 802.3 10Base-2 and 10Base-T Ethernet standards
•
Compliant with Plug and Play ISA Specification Version 1.0a
•
Card configured through software program (for non-PnP systems)
•
Auto detection of 8-bit or 16-bit ISA bus
•
Diagnostics program for error tracking on board level
•
I/O address: 200h, 220h, 240h, 260h, 280h, 2A0h, 2C0h, 2E0h, 300h*, 320h, 340h, 360h,
380h, 3A0h, 3C0h, 3E0h
•
IRQ: 3*, 4, 5, 9, 10, 11, 14, 15
•
Boot ROM starting address: C0000h, C40000h, C8000h, CC000h, D0000h*, D4000h,
D8000h, DC000h
•
Boot ROM size: 8k*, 16k
•
Buffer RAM size: 16K bytes
•
Transmission distance:
•
UTP: 100 meters
•
BNC: 185 meters (without repeater), 925 meters (with repeater)
•
Addressable users: 1024
( *: default value)
