TRENDnet TDM-C500, Руководство пользователя, Страница: 56 / 89

35
Apply Changes
Save this bridge configuration. New configuration will take effect after saving into flash memory and rebooting
the system. See section “Admin” for details.
Show MACs
List MAC address in forwarding table.
Routing
The Routing page enables you to define specific route for your Internet and network data.
Most users do not need to define routes. On a typical small home or office LAN, the existing routes that set up
the default gateways for your LAN hosts and for the DSL device provide the most appropriate path for all your
Internet traffic.
−
On your LAN hosts, a default gateway directs all Internet traffic to the LAN port(s) on the DSL device.
Your LAN hosts know their default gateway either because you assigned it to them when you
modified your TCP/IP properties, or because you configured them to receive the information
dynamically from a server whenever they access the Internet.
−
On the DSL device itself, a default gateway is defined to direct all outbound Internet traffic to a route
at your ISP. The default gateway is assigned either automatically by your ISP whenever the device
negotiates an Internet access, or manually by user to setup through the configuration.
You may need to define routes if your home setup includes two or more networks or subnets, if you connect
to two or more ISP services, or if you connect to a remote corporate LAN.
Field Description
Enable Check to enable the selected route or route to be added.
Destination The network IP address of the subnet. The destination can be specified as the IP
address of a subnet or a specific host in the subnet. It can also be specified as all
zeros to indicate that this route should be used for all destinations for which no other
route is defined (this is the route that creates the default gateway).
Subnet Mask The network mask of the destination subnet. The default gateway uses a mask of
0.0.0.0.
Next Hop The IP address of the next hop through which traffic will flow towards the destination
subnet.
Metric Defines the number of hops between network nodes that data packets travel. The
default value is 0, which means that the subnet is directly one hop away on the local
LAN network.
Interface The WAN interface to which a static routing subnet is to be applied.