TRENDnet TDM-C500, Руководство пользователя, Страница: 37 / 89

16
„
WAN IP:
;
Default Route:
Click the radio button to
“Enable”
or
“Disable”
the default Route
functionality.
Configuration Procedure:
1. From the
WAN – Channel Config
page, click and select
PPPoA
connection mode from the
Channel Mode drop down manual. The default
PPPoA
connection setup is displayed.
2. Select the Channel Mode to “PPPoA”. Set the parameters VPI/VCI and Encapsulation mode
according to the ISP setting.
3. Click the radio button and select the Encapsulation type ( LLC or VC-Mux).
Note:
Your ADSL service provider or your ISP will supply these. In this case the ADSL service
provider is using LLC.
4. Check the radio button to
“Enable”
or
“Disable”
the NAPT setting. Leave as it’s default setting if
your ADSL provider or ISP didn’t provide any setting information.
Note: NAPT:
Network Address and Port Translation: An extension of NAT, NAPT maps many
private internal addresses into one IP address. The outside network (WAN) can see this one
IP address but it cannot see the individual device IP addresses translated by the NAPT.
5. Enter your
Username
and
Password
which will be provided by your ADSL provider or ISP.
6. Select the Connection Type form the drop down manual or leave as it’s default setting (Continuous).
7. Click the radio button to
“Enable”
or
“Disable”
the Default Route functionality or leave as its
default (Enable).
8. Click
“Add”
button after setup.
9. You can
“Edit”
( ) or
“Delete”
( ) the existing connection profile under the
Actions
column.
10. Click “Admin/ Commit/Reboot”. Press “Commit” to save the settings into flash memory.
11. The new settings will take effect after reboot the system.
12. The following window display indicates the system restarting process.
13. The following screen display after the system rebooting process. The System Home page will
shows all the connection status and system information.
1483 Routed Mode
1483 Routed:
When
1483 Routed
mode is selected, the following screen will pop-up. Fixed (Or Static) is
used whenever a known Fixed (Or Static) IP is assigned. The accompanying information such as the
Subnet
mask
,
Local IP Address
and the
Remote IP Addres
s should also be specified. Up to three Domain Name
Server (
DNS
) addresses can also be specified (Click
Services – DNS – DNS Server
configuration page and
fill in the DNS server IP address provided by your ISP). These servers would enable you to have access to
other web servers. Valid IP addresses range is from 0.0.0.0 to 255.255.255.255.