VARIJIG
-9-
Routing Squares and Rectangles
■
Ensure the anti-tilt shoe is fitted and secure.
■
Ensure guide bush and cutter is fitted to the
router.
■
Set the cutter depth.
■
Place router onto Varijig with the anti-tilt shoe
sitting on the component.
■
Place router so that guide bush is touching
the inside edge of the frame and switch on
router. Plunge down and rout in a clockwise
direction keeping the guide bush against the
frame edge.
■
At the corners carefully rotate the router so
the anti-tilt shoe does not touch the frame,
complete routing until routed square or
rectangle is complete.
■
After on one circuit, release
plunge and switch off router.
Repeat operation until final depth of cut is
achieved.
After use of the jig it is advisable to keep jig
assembled and store safely.
Please note corners will be rounded
and not square due to rotary cutting
action of the cutter.
Square for Panels
Rectangle for Housing and Trenching
Feed Direction
Turning Corners with Anti-tilt Shoe Fitted
Rounded corner
Mould
MANU-VJS v3.0_MANU-VJS v3 18/06/2012 09:41 Page 9
