TREND TB/TC/S Скачать руководство пользователя страница 2

Страница: 2 / 4

TB/TC/S Strap-on Temperature Sensor Installation Instructions TG201240 Issue 2, 18-Dec-2015.

TB/TC/S

Installation Instructions

Remove Cover

Mount on Pipe

Engage one end of strap over stud

Wrap strap around sensor and pipe and engage other end

over stud

Screw to lift stud and tighten strap to secure sensor to pipe

IMPoRTanT:

Remove any paint on the pipe before fi tting the

strap-on temperature sensor

Insert Cable

either using grommet:

Insert cable through grommet and connect

signal wires, as shown below

or using cable entry gland:

Remove grommet and replace with PG11 cable entry gland

(not supplied), as shown below, and connect signal wires

2 InSTallaTIon

(continued)

Содержание TB/TC/S

Страница 1: ...the protection provided by the equipment may be impaired https partners trendcontrols com 1 Dimensions 2 Requirements 2 Installation 1 Box Contents Contents 1 Box Contents 1 2 Installation 1 3 Disposa...

Страница 2: ...ther end over stud Screw to lift stud and tighten strap to secure sensor to pipe IMPoRTanT Remove any paint on the pipe before fitting the strap on temperature sensor 5 Insert Cable 1 2 3 either using...

Страница 3: ...type module For all IQ2 series controllers with firmware version 2 1 or greater or IQ3 series controllers the following SET Unique Sensor References should be used Thermistor Thermistor TBTC C Thermis...

Страница 4: ...Representative Trend Control Systems Limited Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to...