PTB/KWJ900
-7-
100mm (4”) min.
throat depth
Panel Butt Connector Bolts
Ref. PC/10/M (Pack of ten)
Panel butt connectors are essential for
connecting worktops. They fit into the recess on
the underside of the worktop and are tightened
with a 10mm spanner. The jig has integral bolt
recess slots to allow the bolt recess to be cut in
the underside of the worktop, using the standard
router cutter. The recess is elongated to allow
easy access for the spanner.
Biscuit Jointer for the Router
Ref. 342X1/2TC, TR35X1/2TC, C152X1/4TC
Worktops with inadequate support below them
need additional stability by biscuit jointing the
edges. The biscuit jointing set for the router
together with the No.20 biscuits will ensure
worktops do not sag or warp in time.
Whenever fast action clamps are used, ensure
they do not foul the router path and that they
are securely tightened.
Clamp
Ref. FC/200
Two heavy duty quick action or gripper clamps
with throats of at least 100mm (4”) are required
to secure the jig to the worktop.
Two heavy duty quick action or gripper clamps
with throats of at least 100mm (4”) are
required to secure the jig to the worktop.
Flat Biscuit Dowels
Ref. BSC/20/100 (Pack of 100 biscuits)
Ref. BSC/20/1000 (Pack of 1000 biscuits)
Biscuits are used to strengthen the joint. When
used with PVA glue they expand ensuring a tight
joint.
No.20
MANU/PTB/900 v1.1 23/11/10 09:27 Page 7
