TREND JOINABOARD JOINTING JIG, Руководство пользователя, Страница: 9 / 12

JB/JIG
-9-
The Brush Strip
■
The brush strip reduces the vigour with which
chips normally come out from the cutter. The
blades of the cutter pass through the brush
without damage.
■
The bristles will eventually wear but can be
easily replaced.
IMPORTANT!
Ensure a fine height adjuster is
used and that the plunge is not
retracted. If this is not done, the
cutter will be pulled through the
guide bush.
Cutting the boards
■
Hold the router firmly against the plate and
follow the fingers cutting through both boards.
Ensure all dovetails and half dovetails at the
edges are cut.
■
Separate the two pieces keeping track of the
face sides.
■
Press the joint together. Glue as required.
IMPORTANT!
Do not lift the router up from
the plate with the cutter
spinning. You may damage the
plate or the cutter.
IMPORTANT!
For floor boards the glued joint
must be placed over a joist or a
noggin must be used.