TREND CG608, Руководство пользователя

Страница: 13 / 45

CG608 User Guide
13
battery and separate it with the main board.
2.3.3 Installing the RUIM card
Purchase a RUIM card from network operator. Your phone number and registration
information are stored in your RUIM card. Your RUIM card can be used in any a CDMA
phone. Your number and information will not change.
z
Make sure to switch off your phone before taking out the battery.
z
Make the metal face of the RUIM card down and put it conferring the level of the card.
Then install the battery.
2.3.4 Removing the RUIM card
z
Remove the battery after switching off your phone.
z
Remove the RUIM card.
z
Install the battery.
2.4 Charging the Battery
The Z-222 can be charged either when it is switched on or off.
1. Plug the charger transformer into a standard outlet.
2. Insert the charger output plug into charging connector of the USB port of the phone.
3. The rolling of the electric quantity bar indicates that the phone begins to charge.
4. When the battery level full, charge roll will stop.
5. After charging is complete, switch off the electric supply. Pinch together the spring
clamps on both sides of the charger’s jack and pull out the charger’s jack.
Note:
z
When the battery level is low and only a few minutes of talk time remain, a beep is heard, the battery
icon flashes and the phone display ‘ Battery Low, please recharge soon! ’ When battery is drained
completely, the phone displays ‘ Battery too low, Power off soon! ’
z
When the battery is completely discharged, your phone will turn off.
z
The battery can be charged whenever you want. However, using your phone while charging can
increase the charging time.
z
It is recommended that you charge the battery for three hours (full charging period) before you use
it.